Control of Substances Hazardous to Health — identifying hazards, Safety Data Sheets, WELs, PPE and what to do if you're exposed.
Remove the hazardous substance entirely. Use a non-hazardous alternative if one exists.
Replace with a less hazardous substance or form (e.g. water-based instead of solvent-based paint).
Contain the process so the substance cannot escape into the working environment.
Extract fumes or dust at source before they enter the breathing zone.
Respiratory protection, gloves, eye protection. Only after all other controls have been applied. Must be the right type for the substance.
Suggested length: 10–15 minutes. A toolbox talk is a short briefing on one hazard, given by a supervisor to the crew doing the work.
Bring a real product from your own stores and pass it round. Most people have never read a safety data sheet for a substance they use daily.
Control of Substances Hazardous to Health Regulations 2002 (regs. 6, 7 and 12); Health and Safety at Work etc. Act 1974 s.2(2)(c)
Employers must give workers comprehensible information, instruction and training on the risks they face — Health and Safety at Work etc. Act 1974 s.2(2)(c) and Management of Health and Safety at Work Regulations 1999 reg. 10. Keep the record below as evidence that you did.
| Topic | COSHH: Hazardous Substances at Work |
| Date | |
| Site / location | |
| Delivered by | |
| Actions agreed | |
| Next talk due |
| Name | Signature |
|---|---|
Use the Print handout button to print this record. General guidance only, not legal advice.
Get plain-English guidance on your rights and your employer's legal duties.
General guidance only — not legal advice · Verified August 2026 · © UK Work Rights Ltd · Company No. 17228507 · ICO registered · Registered office: 71–75 Shelton Street, Covent Garden, London, WC2H 9JQ
Written and maintained by Matt Thompson, founder